घरेलू पम्प » Centrifugal Monoblock Pumps - ACM Series

Centrifugal Monoblock Pumps

C.R.I. Centrifugal monoblock pump’s volute chamber and impellers are designed to give the best possible hydraulic efficiency and good suction lift. Sealing is by means of a bellows mechanical seal made of carbon & ceramic is fitted over the shaft ,which is ground to close tolerance. These pumps are power-driven by a totally enclosed  fan cooled A.C. Induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. Dynamically balanced rotor ensures vibration free and noise free operations and increase the life of the bearings and seal. The windings are of high-grade enamelled copper wire and are varnish impregnated. Construction of motor frames and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. A thermal cutout relay (motor protector) is incorporated in single-phase motors. All single-phase pumps require an adequate starter / motor protection control panel.
Power 0.37 kW – 2.2 kW (0.5HP-3 HP)
Frequency / Speed 50 Hz / 2880 RPM
Version Single phase 200-240V, 50Hz, A.C Supply, Permanent split capacitor (CSR) incorporated with thermal cutout relay (motor Protector). Three phase, 380 -415V, 50Hz, A.C Supply
Maximum flow rate 17.8 IPs (64 M3 / Hr)
Maximum total head 52.5 metres
Maximum Operating Pressure 5.25 Bar
Degree of Protection IP 44/ IP 54
Class of insulation A & B
Direction of rotation Clockwise viewed from driving end
Type of duty S1 (continuous)
Sealing Mechanical Seal (Carbon & ceramic)
Maximum suction lift in metre 7
Maximum liquid temperature 33o c
Maximum ambient temperature 40o c
Nominal Pump size in inches(Suction & Delivery) 1 x 1, 1¼ x 1, 1½ x 1¼, 1½ x 1½, 2 x 1½, 2 x 2, 2½ x 2, 3 x 2½, & 3 x 3
  • High operating efficiency resulting lower power consumption
  • Dynamically balanced rotating parts
  • Intended for wide voltage fluctuations
  • Back pull out design for easy maintenance
  • Single- phase motor is incorporated with imported motor protector
Material of Construction
Part Name Material
Pump Casing Cast Iron
Motor Frame Cast Iron / Aluminium
Impeller Cast Iron / Stainless Steel
Shaft Stainless Steel
Sealing Mechanical Seal (Carbon & Ceramic)
 
 
Back to Home Pumps