औद्योगिक पंप » Centrifugal Monoblock Pumps - CTS series

CTS series Centrifugal Monoblock Pumps

C.R.I. Centrifugal monoblock pump’s volute chamber and impellers are designed to give the best possible hydraulic efficiency and good suction lift characteristics. Most modern and highly sophisticated machinery and technology are employed in the manufacture of these pumps using quality raw materials, dynamically balanced impellers and rotors to ensure long life. These pumps are powered by a totally enclosed fan cooled A.C. Induction two pole motor or four pole motor, suitable for continuous duty . Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enamelled copper wire and are varnish impregnated. Construction of motor frames and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. A thermal cutout relay (motor protector) is incorporated in single-phase motors. These pumpsets required an adequate motor protection control panel.
Power Range 0.75 kW, 1.5 kW & 1.85 kW
Speed 2900 rpm
Degree of Protection IP 54.
Class of insulation “B”       
Versions Single Phase 220V / Three Phase 380V-415V, 50Hz, AC
Direction of Rotation     Clock wise viewed from driving end.
Type S1
Nominal Suction and Delivery Sizes 32 mm x 25 mm, 40 mm x 25 mm & 40 mm x 32 mm
Maximum Head   35.5 m
Maximum Suction Lift    8 m
Maximum liquid Temperature +5o C - +60o C
Maximum Ambient Temperature 40o C   
Maximum Working Pressure 3.5 bar
Pump Casing S.S 304
Motor Frame Aluminum
Impeller S.S 304
Shaft S.S 304
Sealing Mechanical Seal (Carbon & Ceramic)
 
 
Back to Industrial Pumps