C.R.I. Centrifugal Jet Self - Priming pump’s volute chamber and impellers are designed to give the best possible hydraulic efficiency and suction lift characteristics. Sealing is by means of a bellows mechanical seal made of carbon & ceramic is fitted over the shaft, which is ground to close tolerance. These pumps are powered by a totally enclosed fan cooled A.C. Induction two pole motor, suitable for continuous duty. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. Dynamically balanced rotor ensures vibration free and noise free operations and increase the life of the bearings and seal. The windings are of high - grade enamelled copper wire and are varnish impregnated. Construction of motor frames and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. A thermal cutout relay (motor protector) is incorporated in all single–phase motors. All single-phase pumps require an adequate starter / motor protection control panel.
| Power Range |
0.55 kW & 0.75 kW |
| Speed |
2900 rpm |
| Degree of Protection |
IP 54 |
| Class of insulation |
“B” |
| Versions |
Single Phase 220V / Three Phase 380V-415V, 50Hz, AC |
| Direction of Rotation |
Clock wise viewed from driving end |
| Type of Duty |
S1 |
| Nominal Suction and Delivery Sizes |
25mm x 25 mm |
| Maximum head |
45 m |
| Maximum Suction lift |
8 m |
| Maximum liquid Temperature |
+5o C - +60o C |
| Maximum Ambient Temperature |
40o C |
| Maximum Working Pressure |
4.5 bar |
| Pump Casing |
S.S 304 |
| Motor Frame |
Aluminum |
| Impeller |
S.S 304 & Optional Noryl |
| Shaft |
S.S 304 |
| Sealing |
Mechanical Seal (Carbon & Ceramic) |
कॉल: 1800 200 1234 
आरएसएस फीड
